Tag Archive: Nylon Mesh

Screen Printing A Versatile Printing Process

Screen printing is also called a stencil process of printmaking. In this method, a design is formed on the cover of fine mesh or silk by applying ink onto the printing surface through the mesh.

Other names of the technique include serigraphy, silkscreen, and serigraph. If you want to explore more about nylon mesh screen you can visit http://www.elkofiltering.com/store/p/399-Nylon-Mesh-1-Micron-Open-Area-1-Width-45-in.aspx

Traditionally, the technique was known with the name silk printing as silk was used in the process. But, presently, synthetic threads are getting used for the process. In this article, we'll discuss several things about the printing technique.

Printing technique

The screen developed from a finely woven fabric known as the mesh is stretched over the wood or aluminum frame. Nylon or steel is used for the woven of mesh. A non-permeable material is used to form a stencil to block off the screen area. Adding to it, the stencil acts as negative of the image to be printed on the screen.

Ink is placed on the screen top and the screen is placed over the paper or another substrate. And there is a full bar which is meant to fill the openings of mesh with ink. The ink present in the mesh is squeezed to the substrate in the prescribed amount through the capillary action. The snap-off action takes place when the squeegee is moved towards the rear of the screen. And this leads to leaving the ink over the surface of the substrate.

There are three different kinds of presses that are used for printing. Such presses are called 'cylinder', 'flat-bed' and 'rotary'.

Stencil for screen printing

Numerous ways are there to prepare stencils for printing. One of the methods is to cut the design from any non-porous material followed by attaching it to the screen bottom.

What Are Mesh & Billboard Banners

Mesh polyvinyl banners are made from polyvinylchloride. The nylon fibers are generally coated and separated into some mesh patterns to decrease the load when the wind strikes them. They could let 10% to 15% of atmosphere slide through them and that's somewhat 2-3 times what breeze pockets can let. Plus, those end pockets just does not look so attractive.

In my honest opinion, when you use a nylon mesh banner display, you need to go for a very durable vinyl material where you can fortify the hems, place pockets in the top and bottom to get a good nylon cable or rope to the installation.

There are times when you would rather do not put out printed screens upon certain occasions, when you do, consider the option of using a net type of banners.

Large Format Billboard Banners

It's fairly common to hear about billboards. What they are is exactly what their title says and what we've been seeing exactly what they are. I am pretty certain you did quite get that, did not you?

During the breakout of digital printing in the '90s, wide format printers could print dimensions of over 16 feet wide and be made specifically to modernize the way they had been used back then.

Back in the old days, manufacturers would set a billboard out by covering the front side with plywood and then paste the printed strips of paper on the plywood. On occasion, they would directly cover the preceding glued advertising prints. Just consider how exhausting that was back in those days money-wise and labor-wise. You can just imagine how technology has made it far too simple for businesses and advertisers now.

Once the production of vinyl billboard banners began, they count to be printed with vibrant graphics, added with rod pockets and installed as one piece of display. The setup was quick and simple in comparison to gluing individual strips of printed screens as stated above. The best part was that the large format printers became increasingly more sophisticated and fast in printing.